Chemistry

The p-Block Elements.

Question:

Ionisation enthalpy (∆ tH1 kJ mol-1) for the elements of Group 13 follows the order.
(a) B > A1 > Ga > In > T1
(b) B < A1 < Ga< In (c) B < A1 > Ga < In < T1                                        
(d) B > A1 < Ga > In < T1

Answer:

d) On moving down the group from B to Tl, a regular decreasing trend in the ionisation energy values is not observed.
ncert-exemplar-problems-class-11-chemistry-chapter-11-the-p-block-elements-5

In Ga, there are ten d-electrons in the penultimate shell which screen the nuclear charge less effectively and thus, outer electron is held firmly. As a result, the ionisation energy of both A1 and Ga is nearly the same. The increase in ionisation energy from In to Tl is due to poor screening effect of 14f electrons present in the inner shell.

previuos
next

The p-Block Elements.

Q 1.

Describe two similarities and two dissimilarities between B and Al.

Q 2.

A certain salt X, gives the following results.
(i) Its aqueous solution is alkaline to litmus.
(ii) It swells up to a glassy material Y on strong heating.
(iii) When cone.H2SO4is added to a hot solution of X, white crystal of an acid Z separates out.

Q 3.

What is the basic building unit of all silicates?

Q 4.

Explain what happens when boric acid is heated.

Q 5.

Suggest a reason as to why CO is poisonous.

Q 6.

Why does borontrifluori.de behave as a Lewis acid?

Q 7.

CO2 is gas while SiO2 is solid at room temperature. Give reason.

Q 8.

How is excessive content of C02 responsible for global warming?

Q 9.

Assertion (A): If aluminium atoms replace a few silicon atoms in three dimensional network of silicon dioxide, the overall structure acquires a negative charge.
Reason (R): Aluminium is trivalent while silicon is tetravalent.
(a) Both A and R are true and R is the correct explanation of A.
(b) Both A and R are true but R is not the correct explanation of A.
(c) Both A and R are not correct.
(d) A is not correct but R is correct.

Q 10.

What are electron deficient compounds? Are BCl3 and SiCl4 electron deficient species? Explain.

Q 11.

Give one method for industrial preparation and one for laboratory preparation of CO and C02 each.

Q 12.

What are Fullerenes ? How are they prepared ?

Q 13.

Give reason why boron and aluminium tend to form covalent compounds.

Q 14.

Discuss the pattern of variation in the oxidation states of
(i) B to Tl (ii) C to Pb.

Q 15.

Why do boron halides form addition compounds with NH3?

Q 16.

Give reasons:
(a) Why do Boron halides form addition compound with NH3?
(b) The tendency for catenation decreases down the group in Group 14.
(c) PbO2 is a stronger oxidising agent than SnO2.

Q 17.

Thermodynamically the most stable form of carbon is
(a)diamond (b) graphite (c) fullerenes (d) coal

Q 18.

What is dry ice? Why is it so called?

Q 19.

Out of CCl4 and SiCl4 which one react with water and why?

Q 20.

Mention the state of hybridisation of B in BH4.

Q 21.

Catenation, i.e., linking •of similar atoms depends on size and electronic  configuration of atoms. The tendency of catenation in Group 14 elements  follows the order
(a) C > Si > Ge > Sn
(b) C » Si > Ge = Sn
(c) Si > C > Sn > Ge
(d) Ge > Sn > Si > C

Q 22.

The reason for small radius of Ga compared to Al is_________ .
(a) poor screening effect of d and f orbitals
(b) increase in nuclear charge
(c) presence of higher orbitals
(d) higher atomic number

Q 23.

The+1 oxidation state in group 13 and +2 oxidation state in group 14 becomes more and more stable with increasing atomic number. Explain.

Q 24.

Explain the following:

  • Gallium has higher ionisation enthalpy than aluminium.
  • Boron does not exist as B3+
  • Aluminium forms [A1F6]3- ion but boron does not form [BF6]3-
  • PbX2 is more stable than PbX4.
  • Pb4+ acts as an oxidising agent but Sn2+ acts as a reducing agent.
  • Electron gain enthalpy of chlorine is more negative as compared to fluorine.
  • TI(N03)3 acts as an oxidising agent.
  • Carbon shows catenation property but lead does not.
  • BF3 does not hydrolyse.
  • Why does the element silicon, not form a graphite like structure whereas carbon does.

Q 25.

Give reason.
(i) C and Si are always tetravalent but Ge, Sn, Pb show divalency.
(ii) Gallium has higher ionization enthalpy than Al. Explain.

Q 26.

How is boron obtained from borax? Give chemical equations with reaction conditions.

Q 27.

Boric acid is an acid because its molecule
(a) contains replaceable H+   ion
(b) gives up a proton.
(c)accepts OHfrom water releasing proton.
(d) combines with proton from water molecule.

Q 28.

In the structure of diborane
(a) all hydrogen atoms lie in one plane and boron atoms lie in a plane perpendicular to this plane.
(b) 2 boron atoms and 4 terminal hydrogen atoms lie in the same plane and 2 bridging hydrogen atoms lie in the perpendicular plane.
(c) 4 bridging hydrogen atoms and boron atoms lie in one plane and two terminal hydrogen atoms lie in a plane perpendicular to this plane.
(d) all the atoms are in the same plane.

Q 29.

Explain why the following compounds behave as Lewis acids?
(i) BC13
(ii) AICI3

Q 30.

How can you explain higher stability of BCl3 as compared to TlCl3?

Q 31.

Give the chemical reactions as an evidence for each of the following observations.
(i) Tin (II) is a reducing agent whereas lead (II) is not.
(ii) Gallium (I) undergoes disproportionation reaction.

Q 32.

What happens when
(i) Quick lime is heated with coke?
(ii) Carbon monoxide reacts with Cl2?

Q 33.

(a) Why do Boron halides form addition compound with NH3?
(b) Assign appropriate reason for each of the following observations:-
(i) Anhydrous AlCl3 is used as a catalyst in many organic reactions.
(ii) No form of elemental silicon is comparable to graphite.

Q 34.

A compound X, of boron reacts with NH3 on heating to give another compound Y which is called inorganic benzene. The compound X can be prepared by treating BF3 with lithium aluminium hydride. The compounds X and Y are represented by the formulas.
(a) B2H6,B3N3H6
(b) B203, B3N3H6
(c) BF3, B3N3H6
(d) B3N3H6 , B2H6

Q 35.

Draw the structure of BC13.NH3 and AlCl3 (dimer).

Q 36.

Assertion (A): Silicones are water repelling in nature.
Reason (R): Silicones are organosilicon polymers, which have (-R2SiO-) as repeating unit.
(a) Both A and R are true and R is the correct explanation of A.
(b) Both A and R are true but R is not the correct explanation of A.
(c) Both A and R are not correct. ‘
(d) A is not correct but R is correct.

Q 37.

Write reactions to justify amphoteric nature of aluminium.

Q 38.

Write the resonance structure of CO32- and HCO3  .

Q 39.

If B-Cl bond has a dipole moment, explain why BCl3 molecule has zero dipole moment.

Q 40.

In some of the reactions thallium resembles aluminium, whereas in others it resembles with group 1 metals. Support this statement by giving some evidences.

Q 41.

Elements of group 14
(a) exhibit oxidation state of +4 only (b) exhibit oxidation state of +2 and +4
(c) form  M2-and M4+ ion (d) form M2+ and M4+ ions.

Q 42.

Why does boron form stable electron deficient compounds?

Q 43.

What is producer gas ?

Q 44.

What is meant by catenation? Why does ‘C show the property of catenation to maximum extent?

Q 45.

The geometry of a complex species can be understood from the knowledge of type of hybridisation of orbitals of central atom. The hybridisation of orbitals of central atom in [B(OH)4]- and the geometry of the complex are respectively
(a) sp3, tetrahedral
(b) sp3, square planar                                                    
(c) sp3d2, octahedral                                                            
(d) dsp2, square planar

Q 46.

The linear shape of C02 is due to  ______ .
(a) sp3 hybridisation of carbon
(b) sp hybridisation of carbon
(c) pπ-pπ bonding between carbon and oxygen
(d) sp2 hybridisation of carbon

Q 47.

Which of the following statements are correct?
(a) Fullerenes have dangling bonds.
(b) Fullerenes are cage-like molecules.
(c) Graphite is thermodynamically most stable allotrope of carbon.
(d) Graphite is slippery and hard and therefore used as a dry lubricant in

Q 48.

Explain the nature of boric acid as a Lewis acid in water.

Q 49.

Give reasons for the following:
(a) CCl4 is immiscible in water, whereas SiCl4 is easily hydrolysed.
(b) Carbon has a strong tendency for catenation compared to silicon.

Q 50.

If a trivalent atom replaces a few silicon atoms in three dimensional network of silicon dioxide, what would be the type of charge on overall structure?