Which reference electrode is used to measure the electrode potential of other electrodes?
The standard hydrogen electrode is used as a reference electrode whose electrode potential is taken to be. zero. The electrode potential of other electrodes is measured with respect to it.
E °en = 1.1 V for Daniell cell. Which of the following expressions are correct description of state of equilibrium in this cell?
The conductivity of 0.20 M solution of KCl at 298 K is 0.0248 S cm-1. Calculate its molar conductivity.
The positive value of the standard electrode potential of Cu+2/Cu indicates that
(a) this redox couple is a stronger reduction agent than the H/H2 couple
(b) this redox couple is a stronger oxidizing agent than H+/H2
(c) Cu can displace H2 from acid
(d) Cu cannot displace H2 from acid
Calculate the potential of hydrogen electrode in contact with a solution whose pH is 10.
What will happen during the electrolysis of aqueous solution of CuSO4 in the presence of Cu electrodes?
(a) Copper will deposit at cathode.
(b) Copper will dissolve at anode.
(c) Oxygen will be released at anode.
(d) Copper will deposit at anode.
Assertion (A): E , increases with increase in concentration of Ag+ ions.
Ag / Ag+
Reason (R): E + has a positive value.
Ag /Ag
How much charge is required for the following reductions:
(i) 1 mol of Al3+ to Al?
(ii) 1 mol of Cu2+ to Cu ?
(iii) 1 mol of Mn04- to Mn2+?
Three electrolytic cells A, B, C containing solutions of ZnS04, AgNO3 and CuS04, respectively are connected in series. A steady current of 1.5 amperes was passed through them until 45 g of silver deposited at the cathode of call B. How long did the current flow? What mass of copper and zinc were deposited?
Define conductivity and molar conductivity for the solution of an electrolyte. Discuss their variation with concentration.
The cell in which the following reaction occurs: 2Fe3+ (aq) + 2I– (aq) —> 2Fe2+ (aq) +I2 (s) has E °cell=0.236 V at 298 K. Calculate the standard Gibbs energy and the equilibrium constant of the cell reaction.
Consultthe table of standard electrode potentials and suggest three substances that can oxidise ferrous ions under suitable conditions.
In the button cells widely used in watches and other devices the following reaction takes place:
Write the Nemst equation for the cell reaction in the Daniell cell. How will the Ecell be affected when concentration of Zn2+ ions is increased?
Consider the figure given below and answer the questions (i) to (vi) that follow.
(i) Redraw the diagram to show the direction of electron flow.
(ii) Is silver plate anode or cathode?
(iii)What will happen if salt bridge is removed?
(iv)When will the cell stop functioning?
(v)How will concentration of Zn+2 cell functions?
(vi)How will the concentration of Zn+2 ions and Ag+ ions be affected after the cell becomes ‘dead'?
Calculate the emf of the cell in which the following reaction takes place:
Ni(s)+2Ag+ (0.002 M) -> Ni2+ (0.160 M)+2Ag(s) Given that E(-)(cell) = 1.05 V .
The molar conductivity of 0.025 mol L-1 methanoic acid is 46.1 S cm2 mol-1. Calculate its degree of dissociation and dissociation constant Given λ °(H+)=349.6 S cm2 mol-1 andλ °(HCOO-) = 54.6 S cm2 mol-1
Unlike dry cell, the mercury cell has a constant cell potential throughout its useful life. Why?
Solutions of two electrolytes 'A' and 'B' are diluted. The Am of 'B' increases 1.5 times while that of A increases 25 times. Which of the two is a strong electrolyte? Justify your answer.
When acidulated water (dil. H2SO4 solution) is electrolysed, will the pH of the solution be affected? Justify your answer.
Assertion (A): Ecell should have a positive value for the cell to function. Reason (R). Ecadlode Eanode
Value of standard electrode potential for the oxidation of Cl ions is more positive than that of water, even then in the electrolysis of aqueous sodium chloride, why is Cl- oxidized at anode instead of water?
Assertion (A): For measuring resistance of an ionic solution an AC source is used.
Reason (R): Concentration of ionic solution will change if DC source is used.
What is the relationship between Gibbs free energy of the cell reaction in a galvanic cell and the emf of the cell? When will the maximum work be obtained from a galvanic cell?
Depict the galvanic cell in which the reaction
Zn(s) + 2Ag+(aq) —-> 7M2+(aq) + 2Ag (s) takes place. Further show:
(i) Which of the electrode is negatively charged?
(ii) The carriers of the current in the cell.
(iii) Individual reaction at each electrode.
Calculate the standard cell potentials of galvanic cell in which the following reactions take place
Using the data given in Q. 8, find out in which option the order of reducing power is correct.
The quantity of charge required to obtain one mole of aluminium from
Al2O3 is (a) IF (b) 6F (c) 3F (d) 2F
In the electrolysis of aqueous sodium chloride solution, which of the half-cell reaction will occur at anode?
Conductivity of an electrolytic solution depends on
(b) concentration of electrolyte
(d) distance between the electrodes
What will happen during the electrolysis of aqueous solution of CuSO4 by using platinum electrodes?
(a) Copper will deposit at cathode.
(b) Copper will deposit at anode.
(c) Oxygen will be released at anode.
(d) Copper will dissolve at anode.
Consider a cell given below:
Cu |Cu2+ || Cl |Cl2, Pt
Write the reactions that occur at anode and cathode.
Assertion (A): Mercury cell does not give steady potential.
Reason (R): In the cell reaction, ions are not involved in solution.
Assertion (A): Electrolysis of NaCl solution gives chlorine at anode instead of 02.
Reason (R): Formation of oxygen at anode requires overvoltage.
mean? Zn /Zn
