What is the flow of charge called ?
Electric Current.
What is an ammeter ? How is it connected in a circuit ? Draw a diagram to illustrate your answer.
How does the resistance of a wire change when :
(i) its length is tripled ?
(ii) its diameter is tripled ?
(in) its material is changed to one whose resistivity is three times ?
A current of 4 A flows around a circuit for 10 s. How much charge flows past a point in the circuit in this time ?
What do you understand by the term “electric potential” ? (or potential) at a point ? What is the unit of electric potential ?
Fill in the following blanks with suitable words :
Resistance is measured in…………….. The resistance of a wire increases as the length…………………. ; as the
temperature………. ; and as the cross-sectional area…………
Keeping the resistance constant, the potential difference applied across the ends of a component is halved. By how much does the current change ?
The graph between V and 1 for a conductor is a straight line passing through the origin.
Which law is illustrated by such a graph ?
What should remain constant in a statement of this law ?
A current of 200 mA flows through a 4 kΩ resistor. What is the p.d. across the resistor ?
(a) Give two examples of substances which are good conductors of electricity. Why do you think they are
good conductors of electricity ?
Calculate the resistance of a copper wire 1.0 km long and 0.50 mm diameter if the resistivity of copper is 1.7 × 10-8 Ωm.
An electric bulb of resistance 20 Ω and a resistance wire of 4 Ω are connected in series with a 6 V battery. Draw the circuit diagram and calculate :
(a) total resistance of the circuit.
(b) current through the circuit.
(c) potential difference across the electric bulb.
(d) potential difference across the resistance wire.
Which of the following equation shows the correct relationship between electrical units ?
1 A = 1 C/s or 1 C = 1 A/s
An electric heater is connected to the 230 V mains supply. A current of 8 A flows through the heater.
(a) How much charge flows around the circuit each second ?
(b) How much energy is transferred to the heater each second ?
A potential difference of 20 volts is applied across the ends of a resistance of 5 ohms. What current will flow in the resistance ?
How does the resistance of a conductor depend on :
(a) length of the conductor ?
(b) area of cross-section of the conductor ?
(c) temperature of the conductor ?
How does the resistance of a wire vary with its :
(a) area of cross-section ?
(b) diameter ?
The electrical resistivities of three materials P, Q and R are given below :
Which material will you use for making (a) electric wires (b) handle for soldering iron, and (c) solar cells ? Give reasons for your choices.
Which of the following statements correctly defines a volt ?
(a) a volt is a joule per ampere.
(b) a volt is a joule per coulomb.
What is meant by conductors and insulators ? Give two examples of conductors and two of insulators.
(a) What is an electric current ? What makes an electric current flow in a wire ?
(b) Define the unit of electric current (or Define ampere).
Fill in the following blank with a suitable word :
Ohm’s law states a relation between potential difference and……………………
The electrical resistivities of four materials A, B, C and D are given below :
Which material is : (a) good conductor (b) resistor (c) insulator, and (d) semiconductor ?
Give two reasons why nichrome alloy is used for making the heating elements of electrical appliances.
(a) Define resistivity. Write an expression for the resistivity of a substance. Give the meaning of each symbol
which occurs in it.
(b) State the SI unit of resistivity.
(c) Distinguish between resistance and resistivity.
(d) Name two factors on which the resistivity of a substance depends and two factors on which it does not depend.
(e) The resistance of a metal wire of length 1 m is 26 Ω at 20 °C. If the diameter of the wire is 0.3 mm, what will be the resistivity of the metal at that temperature ?
A piece of wire of resistance 20 Ω is drawn out so that its length is increased to twice its original length. Calculate the resistance of the wire in the new situation.
If five resistances, each of value 0.2 ohm, are connected in series, what will be the resultant resistance ?
How should the two resistances of 2 ohms each be connencted so as to produce an equivalent resistance of 1 ohm ?
How should the two resistances of 2 ohms each be connencted so as to produce an equivalent resistance of 1 ohm ?
What possible values of resultant resistance one can get by combining two resistances, one of value 2 ohm and the other 6 ohm ?
Show how you would connect two 4 ohm resistors to produce a combined resistance of
(a) 2 ohms
(b) 8 ohms.
A wire that has resistance R is cut into two equal pieces. The two parts are joined in parallel. What is the resistance of the combination ?
The circuit diagram given below shows the combination of three resistors R1 R2 and R3 :
Find : (i) total resistance of the circuit.
(ii) total current flowing in the circuit.
(iii) the potential difference across R1.
(a) How many milliamperes are there in 1 ampere ?
(b) How many microamperes are there in 1 ampere ?
