When the current is switched on through a wire, a compass needle kept nearby gets deflected from its north-south position. Explain.
When current is passed through the wire, it deflects the compass near it from its north-south position like a magnet. This is called magnetic effect of the current. As we know that needle of the compass is made up of a thin magnet. When this needle comes in contact with another magnet then the like poles of the magnet repel each other and opposite poles attract each other. So the deflection is seen in the needle. In this case the wire behaves like a magnet and causes deflection in needle of the compass.
Fill in the blanks:
(a) Longer line in the symbol for a cell represents its ___________terminal
(b) The combination of two or more cells is called a ____________.
(c) When current is switched ‘on' in a room heater, it ___________.
(d) The safety device based on the heating effect of electric current is called a _____________.
Will the compass needle show deflection when the switch in the circuit shown by fig. 14.15 is closed?
When the current is switched on through a wire, a compass needle kept nearby gets deflected from its north-south position. Explain.
Mark ‘T' if the statement is true and ‘F' it is a false:
(a) To make a battery of two cells, the negative terminal of one cell is connected to the negative terminal of the other cell. [T/F]
(b) When the electric current through the fuse exceeds a certain limit , the fuse wire melts and breaks. [T/F]
(c) An electromagnet does not aatract a piece of iron. [T/F]
(d) An electric bell has an electromagnet. [T/F]
Fig. 14.11 shows four cells fixed on a board. Draw lines to indicate how you will connect their terminals with wires to make a battery of four cells.
An electrician is carrying out some repairs in your house. He wants to replace a fuse by a piece of wire. Would you agree? Give reasons for your response.
Zubeda made an electric circuit using a cell holder shown in fig. 14.16, a switch and a bulb. When she put the switch in the ‘ON' position, the bulb did not glow. Help Zubeda in identifying the possible defects in the circuit.
In the circuit shown in fig. 14.17.
Would any of the bulb glow when the switch is in the ‘OFF' position?
What will be the order in which the bulbs A, B and C will glow when the switch is moved to the ‘ON' position?
The bulb in the circuit shown in fig. 14.13 does not glow. Can you identify the problem? Make necessary changes in the circuit to make the bulb glow.
Draw in your notebook the symbols to represent the following components of electrical circuits: connecting wires, switch in the ‘OFF' position, bulb, cell, switch in the ‘ON' position and battery.
Do you think an electromagnet can be used for separating plastic bags from a garbage heap? Explain.
