What happens when
(a) Borax is heated strongly
(b) Boric acid is added to water
(c) Aluminium is treated with dilute NaOH
(d) BF3 is reacted with ammonia?
A certain salt X, gives the following results.
(i) Its aqueous solution is alkaline to litmus.
(ii) It swells up to a glassy material Y on strong heating.
(iii) When cone.H2SO4is added to a hot solution of X, white crystal of an acid Z separates out.
Explain the difference in properties of diamond and graphite on the basis of their structures.
Give reasons for the following:
(a) CCl4 is immiscible in water, whereas SiCl4 is easily hydrolysed.
(b) Carbon has a strong tendency for catenation compared to silicon.
Assertion (A): Silicones are water repelling in nature.
Reason (R): Silicones are organosilicon polymers, which have (-R2SiO-) as repeating unit.
(a) Both A and R are true and R is the correct explanation of A.
(b) Both A and R are true but R is not the correct explanation of A.
(c) Both A and R are not correct. ‘
(d) A is not correct but R is correct.
What happens when
(a) Borax is heated strongly
(b) Boric acid is added to water
(c) Aluminium is treated with dilute NaOH
(d) BF3 is reacted with ammonia?
Match the species given in Column I with properties given in Column II.
Column I | Column II |
(i) Diborane | (a) Used as a flux for soldering metals |
(ii) Gallium ‘ | (b) Crystalline form of silica |
(iii) Borax | (c) Banana bonds |
(iv) Aluminosilicate | (d) Low melting, high boiling, useful for measuring high temperatures |
(v) Quartz | (e) Used as catalyst in petrochemical industries |
The reason for small radius of Ga compared to Al is_________ .
(a) poor screening effect of d and f orbitals
(b) increase in nuclear charge
(c) presence of higher orbitals
(d) higher atomic number
Which of the following statements are correct?
(a) Fullerenes have dangling bonds.
(b) Fullerenes are cage-like molecules.
(c) Graphite is thermodynamically most stable allotrope of carbon.
(d) Graphite is slippery and hard and therefore used as a dry lubricant in
Me3SiCl is used during polymerisation of organo silicones because
(a) the chain length of organo silicone polymers can be controlled by adding Me3
(b) Me3SiCl blocks the end terminal of silicone polymer.
(c) Me3SiCl improves the quality and yield of the polymer. –
(d) Me3SiCl acts as a catalyst during polymerization.
If the starting material for the manufacture of silicons is RSiCl3 write the structure of the product formed.
Aluminium trifluoride is insoluble in anhydrous HF but dissolves on addition of NaF. Aluminium trifluoride precipitates out of the resulting solution when gaseous BF3 is bubbled through. Give reason.
In some of the reactions thallium resembles aluminium, whereas in others it resembles with group 1 metals. Support this statement by giving some evidences.
Give reason.
(i) C and Si are always tetravalent but Ge, Sn, Pb show divalency.
(ii) Gallium has higher ionization enthalpy than Al. Explain.
The geometry of a complex species can be understood from the knowledge of type of hybridisation of orbitals of central atom. The hybridisation of orbitals of central atom in [B(OH)4]- and the geometry of the complex are respectively
(a) sp3, tetrahedral
(b) sp3, square planar
(c) sp3d2, octahedral
(d) dsp2, square planar
Silicon has a strong tendency to form polymers like silicones. The chain length of silicone polymer can be controlled by adding f (a) MeSiCl3 (b) Me2SiCl2 (c) Me3SiCl (d) Me4Si
Assertion (A): If aluminium atoms replace a few silicon atoms in three dimensional network of silicon dioxide, the overall structure acquires a negative charge.
Reason (R): Aluminium is trivalent while silicon is tetravalent.
(a) Both A and R are true and R is the correct explanation of A.
(b) Both A and R are true but R is not the correct explanation of A.
(c) Both A and R are not correct.
(d) A is not correct but R is correct.
Describe the shapes of BF3 and BH4–. Assign the hybridisation of boron in these species.
What are electron deficient compounds? Are BCl3 and SiCl4 electron deficient species? Explain.
Thermodynamically the most stable form of carbon is
(a)diamond (b) graphite (c) fullerenes (d) coal
Give the chemical reactions as an evidence for each of the following observations.
(i) Tin (II) is a reducing agent whereas lead (II) is not.
(ii) Gallium (I) undergoes disproportionation reaction.
Explain the following:
(i) C02 is a gas whereas Si02 is a solid.
(b) Silicon forms SiF62- ion whereas corresponding fluoro compound of carbon is not known.
Assertion (A): Silicones are water repelling in nature.
Reason (R): Silicones are organosilicon polymers, which have (-R2SiO-) as repeating unit.
(a) Both A and R are true and R is the correct explanation of A.
(b) Both A and R are true but R is not the correct explanation of A.
(c) Both A and R are not correct. ‘
(d) A is not correct but R is correct.
Explain the following reactions.
(a) Silicon is heated with methyl chloride at high temperature in the presence of copper.
(b) Silicon dioxide is treated with hydrogen fluoride.
(c) CO is heated with ZnO.
(d) Hydrated alumina is treated with aqueous NaOH solution.