A capacitor of 4 μF is connected as shown in the circuit. The internal resistance of the battery is 0.5 Ω. The amount of charge on the capacitor plates will be
(a) 0 (b) 4 μC
(c) 16 μC (d) 8 μC
(d)
Key concept: A capacitor offers zero resistance in a circuit when it is uncharged, i.e., it can be assumed as short circuited and it offers infinite resistance when it is fully charged.
At steady state the capacitor offers infinite resistance in DC circuit and acts as open circuit as shown in figure, therefore no current flows through the capacitor and 10 Ω resistance, leaving zero potential difference across 10 Ω resistance. Hence potential difference across capacitor will be the potential difference across A and B.
The potential difference across lower and middle branch of circuit is equal to the potential difference across capacitor of upper branch of circuit.
Current flows through 2 Ω resistance from left to right, is given by I=v/R+r=1A.The potential difference across 2Ω resistance, V=IR= 1 x 2 = 2V Hence potential difference across capacitor is also 2 V.
The charge on capacitor is q = CV= (2 μF) x 2 V = 8 μC.
A parallel plate capacitor is charged by a battery. After sometime, the battery is disconnected and a dielectric slab with its thickness equal to the plate separation is inserted between the plates. How will
(i)the capacitances of the capacitor,
(ii)potential difference between the plates and
(iii)the energy stored in the capacitors be affected? Justify your answer in each case.[Delhi 2010]
(i) Depict the equipotential surfaces for a system of two identical positive point charges placed a distance d apart.
(ii) Deduce the expression for the potential energy of a system of two point charges q1 and q2 brought from infinity to the points with positions and r2 respectively, in presence of external electric field E. [Delhi 2010]
(i) How is the electric field due to a charged parallel plate capacitor affected when a dielectric slab is inserted between the plates fully occupying the intervening region?
(ii) A slab of material of dielectric constant K has the same area as the plates of a parallel plate capacitor but has thickness 1/2 d,
where d is the separation between the plates. Find the expression for the capacitance when the slab is inserted between the plates. [Foreign 2010]
A capacitor is made of two circular plates of radius R each, separated by a , distance d << R. The capacitor is connected to a constant voltage. A thin
conducting disc of radius r << R and thickness t << r is placed at the centre of the bottom plate. Find the minimum voltage required to lift the disc if the mass of the disc is m.
A wire AB is carrying a steady current of 12 A and is lying on the table. Another wire CD carrying 5 A is held directly above AB at a height of 1mm. Find the mass per unit length of the wire CD, so that it remains suspended at its position when left free. Give the direction of the current flowing in CD with respect to that in [Take the value of g =10 ms-2][All India 2013]
Two point charges of magnitude +q and -q are placed at (-d/2, 0, 0) and (d/2, 2, 0), respectively. Find the equation of the equipotential surface where the potential is zero.
Why is the potential inside a hollow spherical charged conductor is constant and has the same value as on its surface?[Foreign 2012]
Why there is no work done in moving a charge from one point to another on an equipotential surface? [Foreign 2012]
Two charges q1 and q2 are placed at (0, 0, d) and (0, 0, -d) respectively. Find
the locus of points where the potential is zero.
A parallel plate capacitor of capacitance C is charged to a potential V. It is then connected to another uncharged capacitor having the same capacitance. Find out the ratio of the energy stored in the combined system to that stored initially in the single capacitor.[All India 2014]
Prove that, if an insulated, uncharged conductor is placed near a charged conductor and no other conductors are present, the uncharged body must intermediate in potential between that of the charged body and that of infinity.
(i) A parallel plate capacitor is charged by a battery to a potential. The battery is disconnected and a dielectric slab is inserted to completely fill the space between the plates.
How will
(a)its capacitance
(b)electric field between the plates and
(c)energy stored in the capacitor be affected? Justify your answer giving necessary mathematical expressions for each case.
(ii) (a) Draw the electric field lines due to a conducting sphere.
(b) Draw the electric field lines due to a dipole.
Define the term potential energy for charge q at a distance r in an external field. [All India 2009]
(i)Write two characteristics of equipotential surfaces.
(ii) Draw the equipotential surfaces due to an electric dipole. [All India 2009 C]
Two point charges 40, O are separated by lm in air. At what point on the line joining the charges, is the electric field intensity zero? Also calculate the electrostatic potential energy of the system of charges taking the value of charge, O = 2 X 10~7 C. [All India 2008]
Equipotentials at a great distance from a collection of charges whose total sum is not zero are approximately
(a) spheres (b) planes
(c) paraboloids (d) ellipsoids
Calculate the potential on the axis of a ring due to charge Q uniformly distributed along the ring of radius R.
The given graph shows the variation of charge q versus potential difference V for two capacitors Cl and C2. Both the capacitors” have same plate separation but plate area of C2 is greater than that Cx .Which line (A or B) corresponds to and why?[All India 2014 C]
The potential due to a dipole at any point on its axial line is zero. [All India 2009 C]
What is the electric potential due to an electric dipole at an equatorial point?[All India 2009]
What is the electric potential due to an electric dipole at an equatorial point?[All India 2009]
Two point charges q1 and q2 are located at q and r2, respectively in an external electric field E. Obtain the expression for the total work done in assembling this configuration. [Delhi 2014 C]
Figure shows some equipotential lines distributed in space. A charged object is moved from point A to point B.
(a) The work done in Fig. (i) is the greatest.
(b) The work done in Fig. (ii) is least.
(c) The work done is the same in Fig. (i), Fig.(ii) and Fig. (iii).
(d) The work done in Fig. (iii) is greater than Fig. (ii) but equal to that in
In a region of constant potential
(a) the electric field is uniform
(b) the electric field is zero
(c) there can be no charge inside the region
(d) the electric field shall necessarily change if a charge is placed outside the region
If a conductor has a potential V≠0 and there are no charges anywhere else outside, then
(a) there must be charges on the surface or inside itself
(b) there cannot be any charge in the body of the conductor
(c) there must be charges only on the surface
(d) there must be charges inside the surface
In the figure given below X, Y represent parallel plate capacitors having the same area of plates and the same distance of separation between them. What is the relation between the energies stored in the capacitors?
You are given an air filled parallel plate capacitor C1. The space between its plates is now filled with slabs of dielectric constants Kx and K2 as shown in figure. Find the capacitance of the capacitor C2 if area of the plates is A and distance between the plates is d.
(i) Derive the expression for the capacitance of a parallel plate capacitor having plate area A and plate separation d.
(ii) Two charged spherical conductors of radii and 1^ when connected by a conducting plate respectively. Find the ratio of their surface charge densities in terms of their radii. [Delhi 2014]
For any charge configuration,equipotential surface through a point is a normal to the electric field. Justify. [Delhi 2014]
Can two equipotential surface intersect each other? Justify your answer. [Delhi 2011 c]
What is the work done in moving a test charge q through a distance of 1 cm along the equatorial axis of an electric dipole? [All India 2009]
A dipole with its charge -q and +q located at the points (0, – b,0) and (0,+ 5,0) is present in a uniform electric field E. The equipotential surfaces of this field are planes parallel to the Y Z-plane.
(i)What is the direction of the electric field E?
(ii)How much torque would the dipole experience in this field?[Delhi 2010 C]
Two point charges 40, O are separated by lm in air. At what point on the line joining the charges, is the electric field intensity zero? Also calculate the electrostatic potential energy of the system of charges taking the value of charge, O = 2 X 10~7 C. [All India 2008]
(i) Two points charges qx and q2 initially at infinity, are brought one by one to points Px and P2 specified by position vectors rt and r2 relative to same origin. What is the potential energy of this charge configuration? Define an equipotential surface.
(ii) Draw schematically the equipotential surface corresponding to a field that uniformly increases in magnitude but remains constant in direction. [Delhi 2008]
